Steel Stud Wall HDL (High Density Laminate & composite panels)
Steel Stud Wall HDL (High Density Laminate & composite panels)
High Compressive Strength Mineral Wool ci with Fluid or Sheet AWB
Overview
Overview
This Enclosure Solutions Wall System includes a steel stud structure with HDL/HPL panels, exterior sheathing, high compressive strength mineral wool ci & mineral wool cavity batt insulation. Complies with ASTM E2357 (air), & ASTM E331 (water).
Get all the construction documentation you'll need, in a single click:
Specifications and Literature
Specifications and Literature
Data Sheets (8)
Brochures (2)
Safety Documents
Guide Specifications (1)
Technical Documentation (3)
LEED (1)
Warranty (1)
Code Compliance (3)
Products In This Solution
Products In This Solution
Additional Products
Additional Products
Sold Separately
- Interior Gypsum Board
- Galvanized Steel Studs
- Exterior Gypsum Sheathing
- Air & Water Barrier (AWB)
- Air & Water Sealing Fasteners
- Cladding Attachment System
- HDL / HPL Panel System
Performance Attributes
Performance Attributes
Durability
Fire Resistance
Recycled Materials
Thermal Comfort
ASHRAE 90.1
ASHRAE 90.1
ASHRAE Standard 90.1 requires Continuous Insulation (CI) be used for all commercial and some residential buildings in the United States. Continuous insulation is defined in 90.1 as “insulation that is continuous across all structural members without thermal bridges other than fasteners and service openings. It is installed on the interior, exterior, or is integral to any opaque surface of the building envelope”.
ASTM E2307
ASTM E2307
ASTM E2307 measures the ability of perimeter fire barrier systems to maintain a seal and prevent interior fire spread as the exterior wall assembly deflects and deforms during fire exposure. The ASTM E2307 test exposes the joint to fire from the room of fire origin and the exterior wall to fire from both the interior and the exterior as the fire plume exits the room of fire origin through a window opening. ASTM E 2307 determines the period of time that the perimeter fire containment system will limit flame penetration through the opening between the exterior wall assembly and the floor assembly.
Additional Attributes and Compliance
Additional Attributes and Compliance
This wall assembly enclosure also meets the following codes and standards. Click a standard to learn more
Contact Us
Contact Us
Even though we’re a global company, we’re always ready to answer your technical support questions regarding our products and solutions. Email to speak with our GETTECH team.