Owens Corning
Filters
Applied Filters:Foundations × Reset

Filter

Show All Filters
FOAMGLAS® Perinsul® SIB

Cellular Glass InsulationFOAMGLAS® Perinsul® SIB

FOAMGLAS® PERINSUL® SIB Cellular Glass Structural Insulating Block is a long-lasting, high-compressive-strength, rigid insulating block that creates a continuous thermal barrier at the base of masonry veneer exterior walls for net zero ready and other high-performance buildings.
    FOAMULAR® NGX® 150

    XPS InsulationFOAMULAR® NGX® 150

    Choose high-performance foam board insulation from Owens Corning for residential & commercial building insulation. Find durable NGX insulation boards.
    • R-Value Ranges: 5-15
    • Thickness Ranges: 1-3"
    FOAMULAR® NGX® 250

    XPS InsulationFOAMULAR® NGX® 250

    Owens Corning® FOAMULAR® & FOAMULAR® NGX® 250 Extruded Polystyrene (XPS) Insulation is a closed cell, moisture-resistant rigid foam board well suited to meet the needs for a wide of building applications.
    • R-Value Ranges: 4-20
    • Thickness Ranges: 0.75-4"
    FOAMULAR® NGX® 400/600/1000

    XPS InsulationFOAMULAR® NGX® 400/600/1000

    Owens Corning® FOAMULAR® NGX® 400/600/1000 are high strength Extruded Polystyrene (XPS) Insulation products designed for use in engineered applications requiring additional load-bearing capability. It can also be used in tapered insulation systems.
    • R-Value Ranges: 5-15
    • Thickness Ranges: 1-3"
    FOAMULAR® NGX® Edgelock®

    XPS InsulationFOAMULAR® NGX® Edgelock®

    Owens Corning® FOAMULAR® NGX® Edgelock® is high strength durable Extruded Polystyrene (XPS) Insulation product designed for use in engineered applications requiring additional load-bearing capabilities.
      FOAMULAR® NGX® INSUL-DRAIN®

      XPS InsulationFOAMULAR® NGX® INSUL-DRAIN®

      FOAMULAR® NGX® INSUL-DRAIN® Drainage Board is designed specifically for foundations to improve thermal foundation performance through a higher R-value. Fabric covered channels drain water from vertical foundation walls.
      • R-Value Ranges: 4.4-10.6
      • Thickness Ranges: 1-2.25"
      ProPink ComfortSeal™ Sill & Framing Gasket

      Fiberglass InsulationProPink ComfortSeal™ Sill & Framing Gasket

      ComfortSeal™ Sill Gasket is a polyethylene foam gasket, which provides resilient sealing in new and retrofit construction. ComfortSeal™ Framing Gasket is a low cost, durable, easy to install, compressible polyethylene foam gasket specially designed to seal air leakage.