Berkshire® Hip & Ridge Shingles
Berkshire® Hip & Ridge Shingles
Defend.Helps Protect Against Nature's Elements
Defend.Helps Protect Against Nature's Elements
Specifically designed for use with Berkshire® Collection Shingles, Berkshire® Hip & Ridge Shingles provide a sophisticated finishing element.
- Berkshire® Hip & Ridge Shingles features our patented SureNail® Technology with Triple Layer protection®. SureNail® Technology adds a layer of reinforcing fabric in the nailing zone.
- Thickness, proportion and color selection reminiscent of natural slate
- Limited lifetime warranty*/† based on the coverage of the Berkshire® Shingle installed
- Berkshire® Hip & Ridge Shingles are required for the 25-year Algae Resistance Warranty* on Berkshire® Collection Shingles
Part of the Owens Corning® Total Protection Roofing System®^.
Specifications & Literature
Specifications & Literature
Warranty (1)
Safety Documents
Technical Information
Technical Information
Nominal Size | 12" x 10 5/8" |
|---|---|
Exposure | 8" |
Pieces per Carton | 30 |
Lineal Feet per Carton | 20 |
1. Includes core weight
2. All values are approximate.
3. Limited to single layer applications above 650°F (343°C), but not greater than 6" (152mm) thickness.
4. With heat up schedule.
5. The surface burning characteristics of these products have been determined in accordance with UL 723, ASTM E84 or CAN/ULC-S102. Values are reported to the nearest 5 rating.
6. Preproduction qualification testing
7. It is critical to have the right amount of intake ventilation and to adequately seal the attic floor to prevent pulling air from conditioned space.
8. For each Gable Mount fan, Owens Corning Roofing requires 890 square inches of intake. See instructions for details.
9. For each Roof Mount fan, Owens Corning Roofing requires 600 square inches of intake. See instructions for details.
10. The surface burning characteristics of these products have been determined in accordance with UL 723, ASTM E84 or CAN/ULC-S102. This standard should be used to measure and describe the properties of materials, products or assemblies in response to heat and flame under controlled laboratory conditions and should not be used to describe or appraise the fire hazard or fire risk of materials, products or assemblies under actual fire conditions. However, results of this test may be used as elements of a fire risk assessment which takes into account all of the factors which are pertinent to an assessment of the fire hazard of a particular end use. Values are reported to the nearest 5 rating.
11. Preproduction qualification testing complete and on file. Chemical analysis of each production lot required for total conformance.
^ Excludes non-Owens Corning™ Roofing Products such as flashing, fasteners and wood decking.
* See actual warranty for complete details, limitations and requirements.
† 40-Year Limited Warranty on commercial projects.
Applicable codes and standards
- ASTM D228
- ASTM D3462
- CSA A123.5
- ICC-ES AC438
- PRI ER 1378E01
- ASTM D3018, Type I
- Florida Product Approval
- Miami-Dade Product Approval
- ASTM D3161, Class F Wind Resistance
- ASTM E108/UL 790, Class A Fire Resistance
Total Protection Roofing System®Total Protection is more than shingle deep
Total Protection is more than shingle deep
It takes more than shingles to protect your home. It takes an integrated system of components and layers designed to help perform in three critical areas.
- SEAL Helps create a water-proof barrier
- DEFEND Helps protect against nature's elements
- BREATHE For balanced attic ventilation
Excludes non-Owens Corning® roofing products such as flashing, fasteners and wood decking
Contact Us
Contact Us
Even though we’re a global company, we’re always ready to answer your questions. Call to speak with an Owens Corning representative so you can start your project right away.