Composite products
138 Composite Products Found
Showing 138 Composite Products
Filters
OptiSpray® F Roving
The OptiSpray® F solution is a high performance multi-end roving glass reinforcement, designed for a variety of end use applications. It provides fabricators with a solution to issues associated with increased resin demand and lower glass loading.
Anti-CRAK® HD
Anti-CRAK® HD is designed to provide plastic shrinkage crack control and high quality surface finish to decorative hardscapes, pool decks, sidewalks, slab-on-grade, and other concrete applications.
Anti-CRAK® HP
Anti-CRAK® HP is designed to provide high performance crack control and toughness to commercial and residential slabs, garage floors, and other concrete applications.
Glass Non-Wovens for Panels
Owens Corning surfacing glass Non-Wovens are designed to help flat GRP panels continuous lamination of external skins of truck body and recreational vehicle (RV) lightweight panels.
Glass Non-Wovens M524
M524 (Advantex® ECR-glass) non-wovens help with excellent corrosion resistance, smooth surfacing finish and multi-resin compatibility
VL9202
VL 9202 product especially helps constant cross-section composite pultruded profiles with easy resin wet-out, high quality, uniform surface layer, high flexibility for complex die processing, enhanced part structural strength and long-term durability.
HydroStrand® chopped strands 258 for PA
The HydroStrand® 258 dry use chopped strands (DUCS) is designed to provide excellent dry-as-molded properties in a wide range of PA formulations, as well as outstanding performance in glycol-resistant PA 66 formulations.
LifeMat® Non-Woven Solutions
LifeMat® wet laid glass non-wovens help manufacturers improve the performance and lifespan of batteries. Pasting Mat is for use in flooded lead-acid batteries for stop-start engines. Retainer Ma' is for heavy duty and deep cycle batteries.
M6 X1
M6X1 chopped strand mat represents a compelling solution for large and thick part manufacturing when high productivity is required in hand lay-up or closed mold processes
M705/M705X1
The Advantex® glass M705 chopped strand mat helps enhanced part life and service life strength in applications facing corrosion.
M723A
M723A chopped strand mat represents an ideal solution for demanding applications requiring good surface finish and exceptional mechanical properties, in hand lay-up or closed mold processes.
Multiaxial Non-Crimp Fabrics
Owens Corning multiaxial fabrics allow very high glass content and orientation controlled mechanical properties. Specifically when reinforcing the GRP pipes they help improve the pressure resistance or the fitting joints.
OC Paneluxe™
OC Paneluxe™ multi-end roving is designed for use with unsaturated polyester resins in a wide range of applications, enabling continuous lamination of translucent and opaque panels.
ME1960
ME1960 product is designed for the manufacture of large transportation components such as cab door skins for heavy-duty trucks, buses, and trains as well as home fixtures and other semi-structural general-purpose products requiring high modulus, strength, and aesthetics.
PipeStrand® S1000
PipeStrand® S1000 is designed for the low-pressure filament winding market and is compatible with UP, VE, EP and PU resins.
PipeStrand® S2300
PipeStrand™ S2300 single-end roving is designed for the high-pressure and high-performance epoxy filament winding market. S2300 delivers outstanding mechanical properties in aromatic amine-cured epoxies.
PulStrand® 4100
PulStrand® 4100 Type 30® is a single end roving designed specifically for pultrusion, offering fast wetting, excellent processing and excellent laminate performance in major resin systems.
Silentex® roving and direct fill technology
The Silentex® continuous glass fiber noise control system is a total system approach from glass texturization to insertion into different silencer designs.
ME1975
The Advantex® ME1975 glass fiber multi-end roving is designed for use in sheet molding compound Class-A applications in automotive and transportation markets.
Sustaina™ Glass Non-Wovens for carpet tiles
Owens Corning surfacing glass non-wovens key product benefits are high strength performance, hot tensile and thermal stability, helping improved dimensional stability. They help carpet tiles preventing from curling and shrinking. In cushion vinyl flooring, they help improve manufacturing line speed, and installation with less breakage.
Telestrand™ Flex Roving
Telestrand™ Flex roving offers a compelling solution for impregnated glass fiber reinforcement (IGFR) used as peripheral reinforcement.
TruPave™ Paving Mat
TruPave™ engineered paving mat from Owens Corning® provides high modulus tensile strength while creating a moisture-resistant barrier to reduce the effects of reflective cracking and dramatically increase the life of the pavement.
Ultrapipe® fabrics
Ultrapipe® fabric solutions are based on Advantex® E-CR glass combining excellent corrosion properties with a long life-time. Our extra translucent glass helps extend the diameter range and glass-based UV lining solutions.
Unicomplex® mat
Unicomplex® mats (CFM/ polyester veil stitched together by synthetic yarn) are designed for ease of use in demanding pultrusion processes where a veil is required to reduce die wear and/or improve the surface appearance.
Uniconform® Mat
UNICONFORM® mat is well suited for very complex forms requiring high deformation in closed molding process, and enables excellent translucency in panel applications.
Unifilo® 500 Series
Unifilo® 500 Series continuous filament mats represent a large choice of tailored reinforcement solutions for efficient manufacture of high performance profiles by pultrusion process.
Unifilo® 700 Series
UNIFILO® 700 Series continuous filament mats represent a large choice of tailored preforming solutions for closed mold process.
Unifilo® 800 Series
UNIFILO® 800 Series continuous filament mats represent a large choice of tailored reinforcement solutions for efficient manufacture of various composite parts by closed mold process.
Unifilo® 801- 809
The Unifilo® 809 type of continuous filament mats (CFM) is designed with a very low binder content helping it evenly disperses in expanded PU foam applications.
790C
Owens Corning wet-use chopped strand (WUCS) reinforcements are specifically designed to provide major benefits through a dry feed process, and to stabilize the gypsum matrix under fire loading which helps maintain the integrity of the wall system.
WindStrand® 2000
The WindStrand® 2000 rovings for weaving fabrics feature a powerful combination of optimized design, high performance, and ultimate reliability, which enable customers to produce longer and up to 6-percent lighter turbine blades.
SE8380
SE8380 Type 30® is specifically designed for phenolic resin systems. Manufactured using state-of-the-art technology in conjunction with statistical process control. Produced with patented, corrosion resistant Advantex® glass.
ME1510
ME1510 represents a compelling solution for structural applications requiring high mechanical properties. This multi-end roving product increases physical properties – enabling vehicle light weighting, increased fuel efficiency and lower CO2 emissions.
CS1530
CS1530 Wet Used Chopped glass fiber represents a compelling reinforcement solution, through optimizing the wallboard manufacturing process while increasing product performance.
366
366 Type 30® Single End Roving is specifically designed for fast wet-out, good processing, high glass loading and excellent laminate properties, to maximize customers’ processing efficiency and minimize their production costs in pultrusion and filament winding applications.
OC HiLight™
OC HiLight™ multi-end roving represents a compelling solution for panels where excellent translucency performance is required.
P244
P244 multi-end roving represents a robust solution for reinforcing light weight and high stiffness composite materials through demanding chopping conditions.
158B
158B Type 30® roving is specifically designed for use in filament winding applications using epoxy resin, where high strength is required. 158B is suitable to reinforce phenolic resins. It's fast wet-out properties and high burst strength maximize processing and minimize costs.
U101
UNICONFORM® mat is well suited for very complex forms requiring high deformation in closed molding process, and enables excellent translucency in panel applications.
Windstrand® 3000A
Windstrand® 3000A combines high weaving efficiencies and increased tensile Modulus at 0° for lighter blades and reliable performance. Blades utilizing Windstrand® 3000A are capable of operating in extreme environments due to its optimized design.
OptiSpray® Roving
OptiSpray® Roving represents a compelling solution for fabricators that want to save time and resin while increasing the performance of their products.
M8643
M8643 continuous filament mat represents a viable solution for efficient manufacturing of high-quality continuous profiles by a pultrusion process.
495
495 multi-end roving represents a compelling solution for enhancing reinforcement when highly demanding mechanical performance are required, especially in pipe applications.
973 & 973CX1
973 family of products represents a compelling solution for Sheet Molding Compound (SMC) Class A & semi-structural parts where efficient processing, superior surface finish and mechanical properties are required.
P204
P204 multi-end roving represents a versatile solution for a wide range of Sheet Molding Compound applications, especially where reduced glass changeovers are needed when manufacturing multiple types of parts.
957L
957L multi-end roving represents a compelling solution for SMC (Sheet Molding Compound) applications where UV stability and high mechanical properties are required.
3040L
3040L multi-end roving represents a compelling solution for opaque panels where easy processing and consistent laminate properties are required.
PINKBAR®
PINKBAR® Fiberglas™ Rebar by Owens Corning Infrastructure Solutions (OCIS) is designed as a cost-effective, lightweight, rust-free reinforcement solution for concrete over traditional steel rebar.
Ultrablade® X
Ultrablade® X fabric solutions leverage Owens Corning’s proprietary Hybrid Fabrics, that are specially designed to combine Glass and Carbon fabrics to provide unique advantages for superior performance.
SE4805
Single end roving designed for polypropylene long-fiber thermoplastics applications.
SE4121
SE4121 single-end Type 30™ roving represents a compelling solution for Polypropylene Long Fiber Thermoplastics (LFT-G and D-LFT) applications where excellent mechanical properties and hydrolysis resistance are required.
SE4818 Low Odor
SE4818 Low Odor is specifically designed for excellent processing and handling for LFT (long fiber reinforced thermoplastic) & CFRT (continuous fiber reinforced thermoplastics) PP applications where low odor is required.
SE4849
SE4849 single-end Type 30™ roving represents a compelling solution for Compounders seeking improved productivity through increased line speed, and the potential for higher glass loadings made possible with excellent dispersion.
905A-AC
High-performance for fast wet through and good density. 905A-AC is reinforcement for Sheet Molding Compound (SMC), which offers improved processing over conventional products in vinyl ester resins and where fast wet through and good sheet density are required.
OptiSpray® ROBO Roving
OptiSpray® ROBO Roving is specifically designed to improve dispersion and increase conformability in an open-mold robotic chop process. The product represents a compelling solution for fabricators that want to improve productivity and achieve optimal aesthetics.
PulStrand® PRO41 Roving
PulStrand® PRO41 Roving is designed to maximize pultrusion processes by reducing the number of glass doffs needed. High tex reduces floor space, improves downtime and labor, and provides the opportunity to make larger parts without compromising mechanical properties/processing.
SE2350
SE2350 single-end Type 30® roving is designed for applications requiring high strength, efficient processing and demanding fatigue life. Maximum strand integrity results from uniform distribution of a proprietary sizing system ensuring excellent resin-to-glass binding.
SE8400
SE8400 Type 30™ continuous single-end roving is specifically designed for pultrusion processing in applications requiring high electrical resistance. Compatible with polyester, vinyl ester and epoxy resins.
SE1200
SE1200 single-end Type 30® roving is a compelling solution designed specifically for knitting and weaving with versatility to work well in filament winding, pultrusion and LFTP applications.
4066
4066 multi-end roving represents an ideal solution for demanding applications requiring high quality surface finish in continuous sheet production.
9560
9560 wet use chopped strand (WUCS), featuring Advantex® glass fibers, is specifically engineered to enhance roofing mat and shingle performance.
9703
9703 wet use chopped strand (WUCS), featuring Advantex® glass fibers, is specifically designed for improved line speeds and product strength in the manufacturing of wet process glass veils.
SE4850
Performax® SE4850 single-end Type 30™ roving represents a compelling solution for Polypropylene in Direct Long Fiber Thermoplastics (D-LFT) applications where improved performance and manufacturing economics is required.
985
985 multi-end roving represents a compelling solution for sheet molding compound applications where complex decorative design and high impact resistance are required such as building materials, consumer goods, and automotive parts.
P243
P243 multi-end roving represents a compelling solution for manufacturing translucent panels using multiple types of cutting equipment.
ME1958
ME1958 multi-end roving represents a versatile solution for the manufacture of pigmented sheet molding compounds and in molds where high flow is required.
ME4040
ME4040, a multi-end, choppable roving, represents a compelling solution for the manufacture of translucent panels and preforms where high translucency and fast wet-out are most important.
P215
P215 multi-end roving represents a compelling solution for sheet molding compound and headliner applications.
OC HP
Introducing higher performance composites by Owens Corning - more modulus, more benefits, more opportunities. This new higher performance glass provides a boost in mechanical properties enhancing part performance or cost optimization through redesign.
M715
M715 chopped strand mat represents a compelling solution in contact molding applications where quick wetting, rapid air release, good conformability and low resin consumption are desired.
P196
P196 single-end Type 30™ roving is specifically designed to match the unique needs of a high performance to process a productivity ratio in a wide variety of applications and industries. Produced with patented Advantex® corrosion resistant E-CR glass by Owens Corning.
M123
M123 chopped strand mat represents a versatile solution for a wide range of applications, including open and closed mold, continuous and discontinuous lamination, filament winding, and other processes.
P207
P207 multi-end roving represents a compelling solution for fabricators that want to save time while realizing optimal performance for continuous process spray-up applications.
ST2070
ST2070 single-end Type 30™ roving is specifically designed for use in the Silentex® Exhaust filling process. The product is designed to minimize process interruptions and ensure efficiency in filling automotive mufflers with continuous fibers.
ST2070LS
ST2070LS Type 30™ roving is specifically designed for use in the Silentex® Exhaust filling process. ST2070LS was developed to match stringent global emission regulations on particulate matter.
M130
M130 chopped strand mat represents a general-purpose solution for open mold hand lay-up applications in a variety of industries.
ST2070 HP
ST2070 HP single-end Type 30™ roving is specifically designed to be highly effective in reducing sound while increasing resistance to muffler blowout.
P219
P219 is a multi-end roving designed specifically for the manufacture of composite pipes by centrifugal casting technology.
S20-FA16
S20-FA16 consists of glass fibers with a nominal length of 10 mm and a nominal diameter of 10—11 μm. The glass fiber veil is bonded by polyvinyl alcohol.
P213
P213 multi-end roving represents a compelling solution for the manufacture of glass mat reinforced thermoplastic (GMT) applications. Produced with patented Advantex® corrosion resistant E-CR glass by Owens Corning.Compatible with polypropylene resin systems.
P249
P249 multi-end roving is a compelling solution designed to provide optimal use for long fiber injection (LFI) applications.
K247
K247 multi-end spun roving is specifically designed to provide extra reinforcement in the transversal direction. Strands are structured into loops to form the roving, providing maximum strand strength. Produced with patented Advantex® corrosion resistant E-CR glass.
SE2348
SE 2348 roving is designed for applications demanding high strength, excellent fatigue life, and excellent processing in a variety of applications.
R25H
R25H single-end Type 30™ roving is specifically designed to maximize strand wet-out, allowing for high speeds in UV cured pultrusion processes and weaving processes, while also allowing for superior mechanical properties for filament winding processes.
P185
P185 multi-end roving is specifically designed to produce composites parts allowing high mechanical properties in filament winding, pultrusion and weaving processes.
M113
M113 chopped strand mat is specifically designed for use in a wide variety of applications. Fine strands enable improved surface aesthetics in contact molding and continuous or discontinuous lamination processes.
M103
M103 chopped strand mat is specifically designed for use in a wide variety of applications. Very fine strands enable exceptional surface aesthetics in contact molding and continuous lamination processes.
PulStrand® 2100
PulStrand® 2100 is designed specifically for high tex pultrusion, offering fast wetting, excellent processing, and superior laminate performance in all major resin systems.
M6
M6 chopped strand mat represents a compelling solution for large and thick part manufacturing when high productivity is required in hand lay-up or closed mold processes.
P209
P209 multi-end roving represents a compelling solution for fabricators that want to save time while realizing optimal performance for continuous process spray-up applications.
111A
111A single-end Type 30™ roving is specifically designed to maximize strand wet-out and optimize processing and handling characteristics in a wide variety of applications.
M723B
M723B chopped strand mat represents an ideal solution where wet and carry process, minimized fiber shedding, rapid air release and lower resin consumption are desired.
M710B
M710B chopped strand mat represents a compelling solution where quick wetting, rapid air release, good conformability and low resin consumption are desired.
DRY-USE CHOPPED STRANDS
Product Selection Guide for glass dry-use chopped strands for Thermoplastic and Thermoset reinforcement.
Anti-CRAK® HP 67/36
Anti-CRAK® HP 67/36 is designed to provide crack control, flexural performance, toughness, and impact to slabs-on-ground, commercial and industrial floors, pavements, precast concrete, manufactured products, and other applications.
Cem-FIL® Glass Fiber Reinforcement
The ideal fiber reinforcement for cementitious based composites, Cem-FIL® AR-glass fibers (Alkali Resistant) are especially designed for providing strength, crack control and toughness while improving productivity.
3050F
3050F multi-end roving is specifically designed to provide reliable processing in medium and high scale gun roving applications providing excellent efficiency and performance in the final part.
SE4849 HP
SE4849 HP single-end Type 30™ roving represents a compelling solution for Compounders seeking improved productivity through increased line speed, and the potential for higher glass loadings made possible with excellent dispersion.
SE4121 HP
SE4121 HP single-end Type 30™ roving represents a compelling higher performance solution for Polypropylene Long Fiber Thermoplastics (LFT-G and D-LFT) applications where excellent mechanical properties and hydrolysis resistance are required.
SE4805 HP
SE4805 HP single-end Type 30™ roving is specifically designed as a higher performance solution for compounders seeking increased productivity through improved processing and handling characteristics, and excellent compatibility in Polypropylene LFT applications
OptiSpray® PRO Roving
OptiSpray® PRO Roving represents a compelling solution for fabricators that want to save time and improve cosmetic appearance.
Milled Fibers
Owens Corning® Milled Fibers are designed to enhance mechanical properties, increase stiffness, improve dimensional stability, and minimize distortion under elevated temperatures.
Cem-FIL® 54
Cem-FIL® 54 is an alkali-resistant glass fiber assembled roving specifically designed for use in the manufacture of glass fiber reinforced concrete (GRC) composites using the simultaneous spray method.
WindStrand® 4000
WindStrand® 4000 Type 30® roving combines high weaving efficiency & superior pultruding processability with the power of a higher modulus glass. WindStrand® 4000 allows more efficient blade designs for the production of lighter, longer blades that reduces the cost of wind energy.
Cem-FIL® 60
Cem-FIL® 60 is a high-integrity chopped-strand glass fiber for use in molded GRC components or in repair mortars to enhance their performance.
Cem-FIL® 61
Cem-FIL® 61 is an alkali-resistant glass fiber assembled roving specifically designed for use in the manufacture of glass fiber reinforced concrete (GRC) composites using the premix method, simultaneous spray method, or other industrial chopping processes.
EcoStrand™
EcoStrand™ has been designed to provide reliable shear strength and flexural properties in polyester and vinyl ester resin systems for pultrusion applications.
GLAS-POWERED™ VEILS
FOR CEILING TILES
The difference is obvious with Owens Corning GLAS-POWERED™ nonwoven veils. Compared to traditional ceiling materials, GLAS-POWERED™ ceiling facers & backers enable higher performance standards.
GLAS-POWERED™ FACERS
FOR INSULATED ROOF DECKS & WALLS
The difference is obvious with Owens Corning GLAS-POWERED™ facers for polyisocyanurate (polyiso) insulated roof decks & walls. Compared to traditional materials like paper faced insulation boards, GLAS-POWERED™ facers enable higher performance standards.
GLAS-POWERED™ VEILS
FOR GYPSUM
The difference is obvious with Owens Corning GLAS-POWERED™ veils. Compared to traditional materials like paper-faced gypsum board or OSB, GLAS-POWERED™ gypsum facers & backers enable higher performance standards.
Cem-FIL® 62
Cem-FIL® 62 is an integral strand glass fiber used to enhance the performance of drymix and GRC components manufactured in premixing processes.
Cem-FIL® 70
Cem-FIL® 70 is a special purpose AR-glass fiber chopped strand designed for mixing with cement and other materials where superior fiber dispersion is required in wet or dry formulations.
Cem-FIL® 5325
Cem-FIL® 5325 has been specially designed for the weaving of fabrics, meshes/nets, and scrims.
ARcoteX® 5326
ARcoteX® 5326 has been specifically developed to be used with polyester and vinylester resins in corrosion-resistant applications.
PINKBAR®+
PINKBAR®+ Fiberglas™ Rebar by Owens Corning Infrastructure Solutions (OCIS) is enabling Glas-Powered™ Concrete. Engineered to meet the performance standards you trust and expect, fiberglass rebar is proven to be stronger and more durable than traditional reinforcement materials.
Slurry-FIL™
Slurry-FIL™ roving and pre-chopped fibers have been specifically designed to work in conjunction with materials commonly used in pavement preservation asphalt mixes to enhance ductility.
SE2307
SE2307 single-end roving is designed to provide extended service life (20+ years) and hydro-thermo stability for high performance filament would epoxy pipe under pressurized conditions.
LuxeStrand™ 220
LuxeStrand™ 220 multi-end roving represents a compelling solution for headliner applications.
TurboStrand™ 4895
TurboStrand™ 4895 single-end Type 30™ roving represents a compelling solution for compounders seeking improved productivity through increased line speed and excellent dispersion.
M7
Newly developed M7 emulsion bound chopped strand mat is specially designed as an ideal solution for open mold hand lay-up applications in a variety of industries.
High-Modulus Glass
Owens Corning® high-modulus glass family was co-created with blade designers and makers since day one — with a performance increase proven by the most reliable testing protocols¹ and an industry-leading specific modulus², it is here to enable longer, lighter, stronger blades cost
ULTRABLADE®
The ULTRABLADE® fabrics, Glas-Powered™ by the Owens Corning® High-modulus glass family are imagined to be our most versatile wind energy solution.
M821B
M821B chopped strand mat is a low-solubility emulsion solution that offers reliable performance in closed mold processes, where good fiber washing-resistance, softness, conformability, and resin flow are necessary.
THIN-WALL™
A patented process for designing and producing precast insulated sandwich wall panels, THIN-WALL™ by Owens Corning Infrastructure Solutions (OCIS) is a structural load bearing insulated precast building envelope system that features composite action between concrete wythes.
TurboStrand™ 4595
TurboStrand™ 4595 is specifically designed for excellent processing and handling for LFT (long fiber reinforced thermoplastic) & CFRT (continuous fiber reinforced thermoplastics) polyamide and polycarbonate applications.
PoleStrand™
PoleStrand™ single-end Type 30™ roving is specifically designed to produce composite utility poles that are lighter with superior corrosion resistance.
Paneluxe™ Lite
Paneluxe™ Lite multi-end roving represents an ideal solution for demanding applications requiring high-quality surface finish in continuous sheet production.
LuxeStrand™
LuxeStrand™ is a multi-end roving specifically designed to reduce blistering and product defects while increasing performance through improved wet-out and great processability.
TURBOSPRAY™
TURBOSPRAY™ Roving represents a compelling solution for fabricators that want to save time and improve cosmetic appearance.
PipeStrand® S4000 HP2
PipeStrand® S4000 HP2 Type 30® roving combines high winding efficiency with the power of a higher-modulus glass for redesigning Type IV pressure vessels. PipeStrand® S4000 HP2 improves material systems for Type IV vessel filament winding.