Skip to main content

VERSATILITY THAT FITS YOUR PROCESS

M710B chopped strand mat represents a compelling solution where quick wetting, rapid air release, good conformability and low resin consumption are desired.

TALK TO AN EXPERT

Specifications and Literature

M710B Product Data Sheet
M710B Product Data Sheet

Product data sheet for M710B

| 384 KB
M710B Product Data Sheet - Portuguese
M710B Product Data Sheet - Portuguese

Product data sheet for M710B in Portuguese.

| 375 KB

Performance Attributes

Easy Handling and Moldability Icon

Easy Handling and Moldability

High Process Efficiency Icon

High Process Efficiency

High Performance Icon

High Performance

Enhanced Service Life Icon

Enhanced Service Life

  • Easy Handling and Moldability

    • Glass bonding designed to minimize fiber shedding during molding process.




    • Ease of handling and ability to conform rapidly to complex molds.

  • High Process Efficiency

    • Tensile strength designed to enable both good tearing and wet and carry process.




    • Fast wetting and quick air release help reducing the labor required to roll out the part.




    • Optimized resin consumption resulting in higher glass content and improved mechanical properties.

  • High Performance

    Optimized product design allows good surface finish and smooth surface behind gelcoat while providing the final part with exceptional tensile and flexural performances.

  • Enhanced Service Life

    Compared to standard E-glass, Advantex® glass helps with enhanced service life in applications facing corrosion.

Applications

M710B is designed to be used both as gel coat backup and standard laminate reinforcement for most contact molding applications including truck parts and panels, marine applications, storage containers and tanks for corrosives.

Technical Information

Availability

M710B is available in South America. Additional weights and widths are available upon request by contacting your Owens Corning representative.

Nominal Mat Weight (g/sq.m) Nominal Mat Weight (oz./sq.ft) Roll Width (cm) Roll Width (in)
225 - 300 - 450 - 600 0.75 - 1.0 - 1.5 - 2.0 140 - 280 55 - 110

Packaging and Labeling

Each roll is wound on a 102 mm (4”) internal diameter cardboard tube and fully enclosed in Cling-Pak™ wrap. Twelve rolls are positioned vertically (except width 280 – it is placed horizontally) on each pallet, banded with tape and Cling-Pak™ wrapped for stability and protection.


Each roll bears a label detailing the product description, product code, nominal weight, roll width, roll number, and date of manufacture.


Roll Diameter (CM) Roll Diameter (IN) Rolls Per Pallet Pallet Size (CM) Pallet Size (IN)
32 12.59 12 97 x 129 38.18 x 50.78

Storage

Unless otherwise specified, it is recommended to store glass fiber products in a cool, dry area. Ideal conditions are at a temperature between 10°C and 35°C and a relative humidity between 35% and 85%. The glass fiber products must remain in their original packaging material until the point of usage. If the storage temperature is below 15°C, it is recommended that the product be stored in the workshop, within its original packaging, at least 24 hours prior to use to help prevent condensation. The packaging is not waterproof. Be sure to protect the product from the weather and other sources of water. When stored properly, the product can be used up to 2 years from the date of manufacture, and retesting is advised after 1 year from the initial production date to insure optimum performance.

    Regional Availability

    M710B is available in South America.

    Applications

    • Pipes and Tanks
    • Transportation > Automotive > Exterior > (Body) Panels
    • Transportation > Automotive > Exterior > Surface Aspect
    • Transportation > Marine

    Talk To An Expert

    We know your business is important - which is why we have hand selected team members with knowledge specific to your needs. For immediate assistance, reach out to our experts below and we'll be in touch with you.

    Ray Arai

    Global Product Manager, CFM/CSM

    Ray

    Contact Us

    Even though we’re a global company, we’re always ready to answer your questions. Call to speak with an Owens Corning representative.

    1-800-GET-PINK®