Owens Corning
TALK TO AN EXPERT

IMPROVED SURFACE AESTHETICS

M113 chopped strand mat is specifically designed for use in a wide variety of applications. Fine strands enable improved surface aesthetics in contact molding and continuous or discontinuous lamination processes.

TALK TO AN EXPERT

Specifications and Literature

M113 CSM Product Data Sheet
M113 CSM Product Data Sheet

M113 chopped strand mat is specifically designed for use in a wide variety of applications. Fine strands enable improved surface aesthetics in contact molding and continuous or discontinuous lamination processes.

| 421 KB
Data Sheets (1)

Performance Attributes

Improved Aesthetics Icon

Improved Aesthetics

ENHANCED SERVICE LIFE & DURABILITY Icon

ENHANCED SERVICE LIFE & DURABILITY

  • Improved Aesthetics

    • Uniform fiber distribution provides a homogeneous surface aspect with minimal fiber print, resulting in consistent thickness throughout the laminate.

  • Enhanced Service Life & Durability

    • Compared to standard E-glass, Advantex® glass helps with enhanced service life in applications facing corrosion.

APPLICATIONS

M113 is designed for contact molding and continuous or discontinuous lamination applications including the manufacturing of heavy truck, automotive, and RV components.

Technical Information

Availability

M113 is available in Europe. Additional weights and widths are available upon request by contacting your Owens Corning representative.

NOMINAL MAT WEIGHT (G/M2) ROLL WIDTH (CM)
225 - 300 - 375 - 450 125

Packaging and Labeling

Each roll is wound on a 102 mm internal-diameter cardboard tube and fully enclosed in Cling-Pak™ wrap.

All rolls bear a label detailing the product description, product code, nominal weight, roll width, roll number, and date of manufacture.

NOMINAL MAT WIDTH (CM) ROLL DIAMETER (CM) ROLLS PER PALLET PALLET
<190 39 9 Vertically positioned on a 120 x 120 pallet, banded with tape and Cling-Pak™ wrapped for stability and protection.
190 to 320 39 6, 9, or 12 Horizontally positioned and secured in a wooden crate.

Storage

Unless otherwise specified, it is recommended to store glass fiber products in a cool, dry area. Ideal conditions are at a temperature between 10°C and 35°C and a relative humidity between 35% and 85%. The glass fiber products must remain in their original packaging material until the point of usage. If the storage temperature is below 15°C, it is recommended that the product be stored in the workshop, within its original packaging, at least 24 hours prior to use to help prevent condensation. The packaging is not waterproof. Be sure to protect the product from the weather and other sources of water. When stored properly, there is no known shelf life to the product, but retesting is advised after three years from the initial production date to ensure optimum performance.

    Regional Availability

    M113 is available in Europe.

    Applications

    • Buildings and Construction > Exterior > Sanitary
    • Consumer Goods > Other Open or Closed Mold
    • Consumer Goods > Swimming Pools
    • Industrial and Corrosion
    • OEM (Original Equipment Manufacturer)
    • Oil and Gas
    • Transportation > Automotive > Exterior > (Body) Panels
    • Transportation > Automotive > Exterior > Surface Aspect
    • Transportation > Automotive > Interior > Semi-Structural
    • Transportation > Heavy Transportation
    • Transportation > Marine
    • Transportation > Rail and Train
    • Transportation > Recreational Vehicles (RV) > Exterior
    • Transportation > Recreational Vehicles (RV) > Interior

    Talk To An Expert

    We know your business is important - which is why we have hand selected team members with knowledge specific to your needs. For immediate assistance, reach out to our experts below and we'll be in touch with you.

    Ray Arai

    Global Product Manager, CFM/CSM

    Ray

    Contact Us

    Even though we’re a global company, we’re always ready to answer your questions. Call to speak with an Owens Corning representative.

    1-800-GET-PINK®