Owens Corning
TALK TO AN EXPERT

HIGHER PERFORMANCE COMPOSITES

Introducing higher performance composites by Owens Corning - more modulus, more benefits, more opportunities. This new higher performance glass provides a boost in mechanical properties enhancing part performance or cost optimization through redesign.

TALK TO AN EXPERT

Specifications and Literature

SE1200 HP Product Data Sheet
SE1200 HP Product Data Sheet

SE1200 HP single-end Type 30™ roving is a compelling solution designed specifically for knitting and weaving with the versatility to work well in filament winding, pultrusion, and LFTP applications.

| 533 KB
Data Sheets (7)

Performance Attributes

PULTRUSION Icon

PULTRUSION

FILAMENT WINDING Icon

FILAMENT WINDING

MUFFLERS Icon

MUFFLERS

REBAR Icon

REBAR

    PULTRUSION

    Reduce the weight of pultruded parts by up to 8% by using higher modulus glass, saving material cost.

    FILAMENT WINDING

    Improve performance by up to 15% in axial tensile strength for helically wound pipe compared to reference products.

    MUFFLERS

    The glass can be used in high temperature muffler applications due to an annealing point increase of 25 - 30°C compared to current products.

    REBAR

    Higher modulus can enable fiberglass rebar with modulus up to 70 GPa on straight bars. Properties previously unattainable on bent bars can now be achieved.

    TELECOM

    Central strength members can be made 8% lighter, enabling increased fiber optic capacity in the cable.

    LONG FIBER THERMOPLASTICS

    Reduce the weight of parts for automotive applications by up to 9%.

    Technical Information

    More Strength and Modulus than Advantex®


    FIBER & BULK GLASS PROPERTIES TEST METHOD UNIT E-GLASS ADVANTEX® E-CR GLASS NEW OC HP
    Fiber Density (predicted) Proprietary g/cm3 2.60-2.62 2.63 2.59
    Refractive Index (bulk annealed) Proprietary 1.562-1.565 1.567 1.557
    MECHANICAL PROPERTIES TEST METHOD UNIT E-GLASS ADVANTEX® E-CR GLASS NEW OC HP
    Pristine Fiber Tensile Strength, 22 °C Proprietary MPa 3815-3830 4050 4650
    Young’s Modulus, 22 °C Proprietary GPa 78-79 82 89.5
    Elongation at Break ASTM D3822 % 3 3 4

    Corrosion Resistance


    SOAKING SOLUTION ADVANTEX® COMPETITOR 1 COMPETITOR 2 COMPETITOR 3 NEW OC HP
    NaOH pH=12.88 X X X ✔ ✔
    10% HCI ✔ ✔ ✔ X ✔
    10% H2SO4 ✔ ✔ ✔ X ✔

    Glass was tested using a dry tensile method based on ASTM D578 before and after soaking in corrosive solutions for 32 days. Passing is defined as retention of ≥75% of starting strength.

      Regional Availability

      OC HP products are available worldwide. Contact your Owens Corning Representative for more information.

      Applications

      • Consumer Goods
      • Infrastructure > Bridges > Approach Slabs
      • Infrastructure > Bridges > Bridge Decks
      • Infrastructure > Bridges > Bridge Railings
      • Infrastructure > Bridges > Median Barriers
      • Infrastructure > Concrete > Expansion Contraction and Isolation Joints
      • Infrastructure > Concrete > Exposed to High Voltages
      • Infrastructure > Concrete > Structural Strengthening
      • Infrastructure > Electrical and Telecommunications > Optical Fiber Cables
      • Infrastructure > Paving
      • Infrastructure > Profiles
      • Infrastructure > Road and Highway > Asphalt Pavement
      • Infrastructure > Road and Highway > High-Speed Tolling Zones
      • Infrastructure > Road and Highway > Median Barriers
      • Infrastructure > Road and Highway > Roads
      • Infrastructure > Tunneling and Mining
      • Pipes and Tanks
      • Transportation > Automotive > Interior > Long fiber (LFRP)
      • Transportation > Automotive > Interior > Near-to-Engine
      • Transportation > Automotive > Interior > Noise Control
      • Transportation > Automotive > Interior > PA Applications
      • Transportation > Automotive > Interior > Semi-Structural
      • Transportation > Automotive > Interior > Structural
      • Transportation > Automotive > Interior > TP (CFRT) Tapes
      • Transportation > Heavy Transportation

      Talk To An Expert

      We know your business is important - which is why we have hand selected team members with knowledge specific to your needs. For immediate assistance, reach out to our experts below and we'll be in touch with you.

      Paige Johnson

      Product Director

      Paige

      Contact Us

      Even though we’re a global company, we’re always ready to answer your questions. Call to speak with an Owens Corning representative.

      1-800-GET-PINK®